Cleaning your Front Load
To
check to see if you are using too much soap simply put 3 clean towels in the washer and set your cycle to regular wash and
your temperature setting to 'Hot' Do not add soap. Allow unit to run for about 5 minutes. Look
inside if you see soap bubbles and if you are then you are using too much soap.
Getting Rid of the Soap
Step 1: Purchase Affresh tablets and follow the steps on the packet for use.
Step 2: Once a month use white vinegar to clean and sterilize washer
by pouring 2 cups directly into the tank.
Step 3: Use 2
tablespoons (yes only 2 tablespoons) of HE detergent. That is all you need to clean your dirtiest
load.
Step 4:
Do not use fabric softener. This is what causes most of the mildew smell in your washer.
*It is ok to use Dryer sheets
in the dryer.
Step 5: Make
sure your drain hose is not more than 6 inches in the drain of the home. If it is pull it up and
only allow 6 inches of the hose into the drain.
